Parameters
- The active substance content80 % silanes
- Indicative consumption1,6 l per 1m2 cross-section of the wall (depending on the diameter and spacing of the holes)
- Appearancewhite emulsion cream
Technically simple and fast solution for damp masonry
estimated consumption of injection cream
- moisture from the perimeter walls of buildings, partitions, basement walls can be removed by the method of additional chemical injection in case of failure or absence of the original waterproofing layer in the foundations
- highly resistant silicone component penetrates deeply into the surroundings of the injection holes, leading to the hydrophobization of the wall pores and the creation of a water-repellent barrier along the line of the holes
- long-term durability of the created injection barrier
- water-based formulation without solvents and odor
- high content of active substance (less inactive carrier is introduced into the masonry)
suitable for brick and mixed masonry with continuous joints, made of clay bricks and mortar, with voids and gaps
ready for direct use without dilution
injection holes are drilled horizontally in the longitudinally running mortar joint above ground level or floor
cream is easily filled into the holes using a manual injection gun with an injection nozzle or with a low-pressure pump with a filling tube (garden sprayer)
