Parameters
- Indicative consumption of the diluted product0.2 - 0.3 l per 1 m2 depending on substrate absorbency
- Appearancewhite - milky emulsion (the original colour of the substrate is preserved after drying)
Effective water-repellent surface protection with Lukofob ELX
comparison table for selection of hydrophobic preparations Lukofob
-
Water-repellent effect
Limiting the penetration of water-soluble impurities - reducing dirt accumulation and enhancing the self-cleaning ability of the treated surface
Protection against frost damage and chemical de-icing agents
Reduced occurrence of surface efflorescence
Limiting conditions for microbial growth -
Enhancement of surface structure of the treated substrate (darker or glossier depending on the substrate structure)
- Economical solution - concentrate diluted with water
Applied by spraying after dilution with a low-pressure sprayer, application with a roller, or broad brush application evenly across the entire surface, in multiple layers without drying in between until the substrate is saturated (wet-on-wet), excess product is wiped off before drying
No additional layer should be applied after drying
For hydrophobization of less absorbent substrates with smaller pores, light and dark textured surfaces, dispersion structural renders and coatings, lime-cement renders, mature concrete pavements, natural absorbent stones such as sandstone, facing bricks and strips, roof concrete tiles
Internal hydrophobic and binding additive for facade coatings or structural renders
Water dilution depends on the substrate porosity
1:8 to 1:10 for spraying/application
1:6 to 1:8 for emphasizing texture and slight gloss
