Parameters
- Indicative consumption of the diluted product10 - 20 lof solution per 1m2 cross-section of the wall (depending on absorption )
- pH13 (strongly alkaline - caustic)
- Appearanceyellowish liquid - dilution with water in a ratio of 1 : 10 before application
Cost-effective solution for damp masonry with Lukofobem 39
-
Moisture can be removed from the perimeter walls, partitions, basement walls using the additional chemical injection method in case the original waterproofing layer in the foundations fails or does not exist
-
The highly resistant silicone component penetrates deeply into the surroundings of the injection holes, leading to the hydrophobization of the wall pores and the creation of a water-repellent barrier along the line of the holes
-
Long-term durability of the created injection barrier
-
Cost-effective solution – concentrate diluted with water
-
Water-based formulation without solvents and odor
Dilution of Lukofob 39 in a ratio of 1 : 10 with water
Suitable for concrete, brick, stone, and mixed masonry
Injection holes should be drilled slightly diagonally above ground level or floor
The application solution can be poured into the holes easily using a garden can or through a tube connected to a supply container placed above the hole, further pressurized using special injectors and a pressure pump
Hazard warning
Danger
Causes severe skin burns and eye damage. Always follow the information on the product label.
